Part Number Hot Search : 
BCP51 X9421 R1019 005L55F 11150 143EC ATS04 SB020
Product Description
Full Text Search
 

To Download 2SC2688-X-T60-A-K Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 UNISONIC TECHNOLOGIES CO., LTD 2SC2688
NPN EPITAXIAL SILICON TRANSISTOR
NPN SILICON TRANSISTOR
DESCRIPTION
The UTC 2SC2688 is designed for use in Color TV chroma output circuits.
FEATURES
* High Electrostatic-Discharge-Resistance. ESDR: 1000V TYP. (E-B reverse bias, C=2300pF) * Low Cre, High fT Cre 3.0 pF (VCB=30V) fT 50MHz (VCE=30V, IE=-10mA)
1
TO-126
*Pb-free plating product number: 2SC2688L
ORDERING INFORMATION
Order Number Normal Lead Free Plating 2SC2688-X-T60-A-K 2SC2688L-x-T60-A-K Package TO-126 Pin Assignment 1 2 3 E C B Packing Bulk
2SC2688L-x-T60-A-K
(1)Packing Type (2)Pin Assignment (3)Package Type (4)Rank (5)Lead Plating
(1) K: Bulk (2) refer to Pin Assignment (3) T60: TO-126 (4) x: refer to Classification of hFE (5) L: Lead Free Plating, Blank: Pb/Sn
www.unisonic.com.tw Copyright (c) 2005 Unisonic Technologies Co., Ltd
1 of 5
QW-R204-023,A
2SC2688
ABSOLUTE MAXIMUM RATING
PARAMETER Collector to Base Voltage Collector to Emitter Voltage Emitter to Base Voltage Collector Current
NPN EPITAXIAL SILICON TRANSISTOR
RATINGS UNIT 300 V 300 V 5.0 V 200 mA Ta=25 1.25 W Total Power Dissipation PD TC=25 10 W Junction Temperature TJ 150 Storage Temperature TSTG -55 ~ +150 Note Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied.
SYMBOL VCBO VCEO VEBO IC
ELECTRICAL CHARACTERISTICS (Ta=25)
PARAMETER SYMBOL Collector Saturation Voltage VCE(SAT) Collector Cutoff Current ICBO Emitter Cutoff Current IEBO DC Current Gain hFE Gain Bandwidth Product fT Feedback Capacitance Cre Note 1. * Pulsed PW 350s, Duty Cycle 2% TEST CONDITIONS IC=20mA, IB=5.0mA VCB=200V, IE=0 VEB=5.0V, IC=0 VCE=10V, IC=10mA VCE=30V, IE=-10mA VCB=30V, IE=0, f=1.0MHz MIN TYP MAX 1.5 100 100 250 3 UNIT V nA nA MHz pF
40 50
80 80
CLASSIFICATION OF hFE
Rank Range N 40 ~ 80 M 60 ~ 120 L 100 ~ 200 K 16 ~ 250
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 5
QW-R204-023,A
2SC2688
Open Collector
NPN EPITAXIAL SILICON TRANSISTOR
BURNOUT TEST CIRCUIT BY DISCHARGE OF CAPACITOR
TEST CONDITION 1. E-B reverse bias 2.C=2300pF 3. Apply on shot pulse to T.U.T. (Transistor Under the Test) by SW. JUDGEMENT Reject; BVEBO waveform defect As a result if T.U.T. is not rejected, apply higher voltage to capacitor and test again.
SW. T.U.T VD C=2 300pF
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 5
QW-R204-023,A
2SC2688
TYPICAL CHARACTERISTICS (Ta=25)
Total Power Dissipation Vs . Ambinet Temperature
NPN EPITAXIAL SILICON TRANSISTOR
Total Power Dissipation, PD (W)
Total Power Dissipation, PD (W)
1.5
Total Power Dissipation Vs. Ambinet Temperature Free Air
10 8 6 4 2 0
Infinite Heat Sink
1.25 1.0
0.75 0.5
0.25 0 25 50 75 100 125 150 175 Ambient Temperature, Ta ()
25 50 75 100 125 150 Ambient Temperature, Ta ()
14
Collector Current, I C (mA)
Collector Current vs. Collector to Emitter Voltage 3.0 150A
Collector Current, IC (mA)
Collector Current vs. Collector to Emitter Voltage 30A
12 10 8 6 4 2
2.5 2.0 1.5 1.0 0.5 0 50 100 150 Collector TO Emitter Voltage, VCE (V) 20A IB=10A
100A IB =50A
0 24 6 8 10 12 14 Collector TO Emitter Voltage, VCE (V)
Collector Current, I C (mA)
DC Current Gain, h FE
Collector Current vs. Base to Emitter Voltage 70 VCE=10V 60 50 40 30 20 10 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 Base to Emitter Voltage, VBE (V)
DC Current Gain vs. Collector Current VCE=10V 200 100 50 10 5 1 0.1
0.5 1 5 10 50 100 5001000 Collector Current, IC (mA)
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 5
QW-R204-023,A
2SC2688
TYPICAL CHARACTERISTICS
Base Saturation Voltage, V BE (SAT) (V) Collector Saturation Voltage, VCE (SAT) (V)
NPN EPITAXIAL SILICON TRANSISTOR
10.0 5.0 1.0 0.5 0.1 0.05 0.01 0.1
IC=10*I B VBE(SAT)
Gain Bandwidth Product, fT (MHz)
Base And Collector Saturation Voltage vs. Collector Current
Gain Banddwidth Product Vs . Emitter Current VCE=30V
200 100 50
VCE(SAT )
0.5 1 5 10 50 100 5001000 Collector Current, IC (mA)
10
-1
-5 -10 -50 -100 Emitter Current, I E (mA)
Feedback Capacitance, Cre (pF)
Feedback Capacitance vs.Collector to Base Voltage IE=0 f=1MHz
10 5
1 5 10 1 50 100 Collector to Base Voltage, VCB (V)
UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 5
QW-R204-023,A


▲Up To Search▲   

 
Price & Availability of 2SC2688-X-T60-A-K

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X